My opinion about Mevspace (prev. Skynode)

Hello guys
So, a number of days after I came upon I would like a customized answer on the worth of Hetzner however with low-cost IPs.. After a number of days of analysis, and discussions on boards, I used to be instructed to contact @Mevspace . And I have to say, I’m very, very shocked about their help, but additionally, a bit disenchanted about one factor, however… I’ll describe it in a while.
In addition to Mevspace, I used to be additionally contemplating Rise-1 from OVH (E-2136, 64GB RAM, 2x512NVMe, 2x4TB SATA HDD), largely due to low-cost IPs, however worth received. I excluded @Hetzner_OL due to their IP setup worth – I do know instances are exhausting, however hey, 304EUR (ex. VAT) for organising a /28 subnet? No, thanks, that is positively an excessive amount of…
I took a have a look at ServerHunter and another Low-Finish suppliers, however I didn’t wish to use vintage {hardware} like L5420 and pay extra cash for a second SSD and two HDDs…
So I contacted Mevspace by e mail asking about customizing the server – I wrote a question late Sunday night and… Their gross sales division answered… After one hour! After a number of emails with numerous questions on for instance platform and so on., they lastly ready a suggestion (it was lower than 12 hours since I despatched a question). I used to be very shocked as a result of… They used a voucher for the usual server to make it cheaper. As soon as I made a cost, their technician instantly mounted 2 HDD drives. Sadly, these weren’t new (for now, each have about 28k power-on hours).
Additionally, technical help response time was… I have to name it instant. Sure – they delivered a server with Debian 10, however I wanted CentOS 8 and after reinstalling, the server stopped responding.
And right here comes the factor that disenchanted me:. After one hour of a help name, technicians discovered that…. RHEL-based photographs don’t work on this practice setup!. That disenchanted me a bit. As an alternative of cloud-init picture, I additionally tried to put in Rocky Linux through KVM and… That is the error I obtained:

Began cancel ready for multipath sibling of sda

In addition to, I can not say something unhealthy about Mevspace. I assumed Hetzner is superb, however when an analogous scenario occurred to my server at Hetzner, the technician solely related KVM and good luck. Hetzner’s technician didn’t care that the difficulty occurred after executing their installimagescript and with their supported, official CentOS picture. No investigation – complete will of assist was simply to attach KVM.

And now, one thing for YABS fanatics. YABS from Mevnode:
root@mevspace1 ~# curl -sL yabs.sh | bash
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# But-One other-Bench-Script #
# v2022-05-06 #
# #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Tue 24 Could 2022 08:49:10 PM UTC

Fundamental System Data:
———————————
Uptime : 1 days, 2 hours, 37 minutes
Processor : AMD Ryzen 5 3600 6-Core Processor
CPU cores : 12 @ 3600.000 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 62.8 GiB
Swap : 15.3 GiB
Disk : 440.8 GiB
Distro : Debian GNU/Linux 11 (bullseye)
Kernel : 5.15.35-1-pve

fio Disk Pace Checks (Blended R/W 50/50):
———————————
Block Measurement | 4k (IOPS) | 64k (IOPS)
—— | — —- | —- —-
Learn | 562.70 MB/s (140.6k) | 860.40 MB/s (13.4k)
Write | 564.19 MB/s (141.0k) | 864.93 MB/s (13.5k)
Whole | 1.12 GB/s (281.7k) | 1.72 GB/s (26.9k)
| |
Block Measurement | 512k (IOPS) | 1m (IOPS)
—— | — —- | —- —-
Learn | 739.37 MB/s (1.4k) | 164.63 MB/s (160)
Write | 778.65 MB/s (1.5k) | 175.59 MB/s (171)
Whole | 1.51 GB/s (2.9k) | 340.22 MB/s (331)

iperf3 Community Pace Checks (IPv4):
———————————
Supplier | Location (Hyperlink) | Ship Pace | Recv Pace
| | |
Clouvider | London, UK (10G) | 188 Mbits/sec | 327 Mbits/sec
On-line.internet | Paris, FR (10G) | 5.84 Mbits/sec | 791 Mbits/sec
Hybula | The Netherlands (40G) | 568 Mbits/sec | 857 Mbits/sec
Clouvider | NYC, NY, US (10G) | 816 Mbits/sec | 121 Mbits/sec
Velocity On-line | Tallahassee, FL, US (10G) | busy | busy
Clouvider | Los Angeles, CA, US (10G) | 814 Mbits/sec | 119 Mbits/sec

iperf3 Community Pace Checks (IPv6):
———————————
Supplier | Location (Hyperlink) | Ship Pace | Recv Pace
| | |
Clouvider | London, UK (10G) | 396 Mbits/sec | 308 Mbits/sec
On-line.internet | Paris, FR (10G) | 679 Mbits/sec | 434 Mbits/sec
Hybula | The Netherlands (40G) | 916 Mbits/sec | 893 Mbits/sec
Clouvider | NYC, NY, US (10G) | 709 Mbits/sec | 198 Mbits/sec
Clouvider | Los Angeles, CA, US (10G) | 718 Mbits/sec | 385 Mbits/sec

Geekbench 5 Benchmark Check:
———————————
Check | Worth
|
Single Core | 1266
Multi Core | 7027
Full Check |

And one very last thing, traceroute if somebody is – looks as if my provider (INEA) has excellent connection to Mevspace by POZIX

Tracing path to 185.16.X.X over a most of 30 hops

1 <1 ms <1 ms <1 ms 192.168.88.1 [192.168.88.1]
2 1 ms 1 ms 1 ms gpon.internet [192.168.1.1]
3 8 ms 2 ms 3 ms d162-193.icpnet.pl [109.173.X.X]
4 1 ms 1 ms 2 ms 192.168.47.193 [192.168.47.193]
5 3 ms 2 ms 2 ms e123-77.icpnet.pl [46.238.123.77]
6 * * 9 ms hurricane-gw.pozix.pl [185.1.4.64]
7 8 ms 8 ms 17 ms meverywhere-sp-z-o-o.e0-2.switch1.waw1.he.internet [216.66.87.22]
8 10 ms 10 ms 10 ms r1w.mevspace.com [149.86.227.11]
9 10 ms 10 ms 10 ms 185.16.X.X

Summarizing – for now, Mevspace has the perfect Assist I’ve ever skilled. Reponse time may be very quick – this is essential for me. The one drawback is the difficulty with RHEL-based OS, however this isn’t the factor that disqualifies the service (as for me).

🔥 Hot and trending web hostings deals 🔥

HostingsCoupons.com - Web Hostings Coupons, Sales, Deals and Discounts
Logo